A high pressure washer has become a fairly popular product in modern households. It can be used to clean terraces, walkways on the street, cars, houses or other items. In this case, you can build the product yourself.
The advantages of a homemade device
Do-it-yourself high pressure washer is designed quickly. In addition, it has other advantages:- simplicity and speed of manufacture;
- does not require any complicated spare parts, everything can be made from simple improvised elements;
- ease of use;
- the possibility of modernization;
- overall performance is almost the same as that of the purchased model;
- low cost.
The equipment presented very quickly flushes even the most persistent dirt from the surface of the object. In this case, there are no stains left. An additional positive feature is the fact that when using the presented apparatus it is almost impossible to damage the surface of the workpiece.
What elements are necessary for work
If you know that a do-it-yourself high-pressure washer is constructed simply and quickly, then now you need to understand its design, and also answer the question of what details are needed for the job.
So, the apparatus consists of a pump or compressor, which provides a water supply. You will also need an electric motor that will ensure the operation of the entire structure. Naturally, the required water tank, a hose for a high pressure washer, a tube, connecting elements (couplings) and lugs are necessary . If you want to make a multifunctional model, then you will also need a power regulator for the pressure of the jet.
How to choose the elements of the device?
In order for the high-pressure wash with your own hands to be done correctly and have high efficiency, you need to figure out which parts you need to purchase., 200 , . , . ( ). , .
, , 220 . . , .
, . , . . , . .
. , . , , .
. , .
Features of the manufacture of the apparatus
Now consider how you can make a car wash high pressure yourself.- First you need to equip the tank with a pump. Please note that all connections must be durable and tight. Use soft couplings for fixing.
- On the other side of the tank you need to attach a hose to which water will be supplied.
- A tip is put on the hose, with the help of which you will direct the stream.
Please note that the power cord must be well insulated from moisture.
Features of device repair
In principle, if this unit breaks, then it is better to contact the after-sales service. Naturally, if you are well versed in the design of the device, you can make an independent repair of high pressure washers .
So, we will figure out what kind of malfunctions can occur in your device. Most often, in sinks there is a decrease in the performance of the pump or pump. Naturally, the efficiency of the apparatus decreases significantly. The reason for this situation is usually the wear of the seals in the pump mechanism. In this case, they should be replaced. However, if such a breakdown happens too often, then pay attention to the quality of the water. Perhaps it contains too many abrasive impurities.
If a pressure regulator is installed on your device, then the rubber rings that are present in its design can also wear out. At the same time, the density of the water jet, its pressure and washing ability may decrease., . , .
, . , . . .
, . , .
, . , , .